Skip to content
Tellency
← All articles

How to Streamline Accounts Payable: From PO to Payment

Published

How to Streamline Accounts Payable: From PO to Payment

Abstract isometric accounts payable workflow illustration

To streamline accounts payable, stop treating it as a pile of invoices and run it as one chain: purchase request, purchase order (PO), receipt, invoice match, approval, payment and ledger entry, all in the same system your inventory and finance teams already use. Most delays come from the handoffs between those steps, not from the work inside them. When the PO, the receiving record and the invoice live in different places, someone has to re-key data and chase answers. An integrated ERP like Tellency, where finance, inventory and procurement share one set of data, removes those handoffs.

This guide is for small and midsize businesses, including retailers and manufacturers, that want a faster, more controlled payables process. It walks through each step, shows where it usually breaks, and covers how to automate it without losing control. It also answers the questions that travel with it: how to manage purchase orders, and how accounts receivable automation fits alongside accounts payable.

Tellency
Connect Finance and Inventory
Tellency connects finance and inventory with sales and other business functions, helping teams work from shared operational data.

TL;DR

  • Accounts payable (AP) is a chain, from PO to receipt to invoice to payment. Streamline the whole chain, not just invoice entry.
  • The core control is the three-way match: the PO, the proof of receipt and the vendor invoice must agree before anyone pays.
  • Automation captures invoice data, matches it and routes approvals. People should handle only the exceptions.
  • Accounts receivable (AR) automation is a separate workflow, but it runs best on the same customer, inventory and ledger data as AP.
  • Tellency connects procurement, inventory and finance on one platform, from $79 per month per seat, with implementation of about eight weeks.

Table of Contents

What a streamlined AP process looks like

Accounts payable is the money your business owes suppliers for goods and services it has already ordered. A streamlined process has three traits: every invoice traces back to an approved order, every approval follows a written rule, and nobody types the same figure twice.

The typical cycle, as Amazon Business describes it, runs like this:

  1. An employee submits a purchase requisition (an internal request to buy something).
  2. Procurement issues a PO that fixes quantity, price, delivery and payment terms.
  3. The receiving team documents what arrived.
  4. The supplier’s invoice is verified against the PO and the receipt, which is called three-way matching. Discrepancies become exceptions.
  5. Verified invoices go through approval by category, amount and policy.
  6. Approved invoices are scheduled according to terms (such as net 30 or net 60) and your cash position.
  7. The transaction is recorded in the general ledger, where accurate coding matters for reporting and audit.

Stripe’s AP guide adds a final check: reconciling payments to invoices and bank statements, and periodically comparing vendor statements with your own AP records.

Streamlining means shortening each of these steps and, more importantly, removing the waiting time between them.

Where AP slows down

Before you change anything, find where your invoices actually sit. In most small and midsize businesses the delays fall into five places.

  • Invoices arrive in several channels. Email attachments, paper mail, supplier portals and PDFs all land in different inboxes.
  • Manual data entry. Someone keys the vendor, date, line items and totals into the accounting system, and typos become payment errors.
  • No order to match against. Purchases made by text message or verbal agreement leave the AP clerk with an invoice and nothing to check it against.
  • Approvals by email. Approvers are away, or the request is buried, and the invoice ages.
  • Disconnected systems. Receiving happens in the warehouse or store system, the PO in a spreadsheet and the ledger in accounting software, so matching means switching between three screens.

The last one is the root cause of the others. If your stock system, purchasing and ledger are separate, every step needs a manual bridge. That is the case for running procurement, inventory and finance on one platform.

Step 1: Control purchasing with a simple PO policy

AP starts before the invoice. If purchases do not begin with a PO, nothing downstream can be matched automatically.

Write a one-page purchasing policy that answers three questions:

  • When is a PO required? Many small businesses set a dollar threshold, plus rules for capital items and recurring services. Pick a threshold that fits your size. The goal is to cover most of your spend without slowing down trivial purchases.
  • Who approves what? Tie approval to amount and category. A $400 packaging reorder and a $40,000 equipment purchase should not take the same route.
  • Who is allowed to do what? Keep duties separate, so the person who approves a purchase is not the person who receives the goods or posts the invoice. This is the simplest fraud control you have.

The policy only works if the system enforces it. Tellency’s role-based access and approval processes mean actions are governed by business rules you define, so a purchase that needs a second approver cannot skip that step. Its procurement module covers purchase orders and matching in the same platform as inventory.

Step 2: Manage purchase orders so they are matchable

A purchase order is only useful for AP if it carries what the invoice will later be checked against. A matchable PO states:

  • the vendor and your internal item or service codes,
  • quantity and unit price,
  • delivery date and location,
  • payment terms,
  • the cost center or general ledger account it belongs to.

The purchase order management process then follows a short loop: request, manager review, approval by amount or category, PO sent to the vendor, receipt documented, invoice matched, record kept. Two habits keep that loop healthy.

Close the loop on every PO. Open POs that never receive goods or invoices distort your commitments and make accruals unreliable. Review open orders weekly and close or cancel the stale ones.

Change the PO, not the invoice. If a vendor’s price or quantity changes, amend the PO through approval first. Otherwise the invoice will arrive as an exception, and someone has to investigate it later.

For product businesses, linking POs to inventory is where the gain is largest. When a PO line becomes a receiving record and then a stock movement, your on-hand counts and your payables update from the same event.

Step 3: Record receipts the moment goods arrive

The receipt is the proof that you got what you ordered. Without it, the match is a two-way check between PO and invoice, which cannot catch short shipments.

For goods, receive against the PO line: confirm the quantity, note damage and record the date. For services, where nothing physically arrives, use evidence of completed work, such as a signed timesheet, a project milestone or a manager’s confirmation, alongside the approved PO and the invoice.

A retail or warehouse example shows why speed matters. A store receives 120 cases against a PO for 150. If receiving is recorded that day, the system flags a 30-case shortfall before the invoice arrives, and the buyer can ask the vendor to ship the balance or credit the difference. If receiving is entered a week later, the invoice may already be approved and paid in full.

PO quantity, received cases, and shortfall comparison

Step 4: Capture and match invoices automatically

This is the step most people mean by “automate accounts payable.” AFP’s 2024 Financial Operations Guide describes automated AP as digitizing the whole invoice-to-payment cycle: invoices are captured, coded, routed, paid, reconciled and archived with an audit trail.

The same guide explains how capture works. Paper invoices can be scanned with optical character recognition (OCR) or AI, and electronic invoices may arrive through EDI (a standard format for exchanging business documents between computers) or as PDFs. The system extracts the invoice data and matches it to purchase orders and receipts.

Set match tolerances

Exact matches are rare. Freight, rounding and partial deliveries create small differences, so decide in advance what the system may accept without a human. For example, you might allow a small percentage variance in quantity or a few dollars in price on low-value lines, and send anything larger to review. Pick numbers that suit your margins, write them into the policy, and revisit them after a quarter of data.

Route exceptions, not everything

The aim is touchless processing for invoices that match and a clear queue for those that do not. A good exception queue shows the reason (price variance, missing receipt, duplicate invoice) and who owns the next action. If clerks are still opening every invoice, you have digitized the work without streamlining it.

What AI can and cannot do here

AI is well suited to reading invoice layouts, suggesting general ledger codes and spotting likely duplicates. Judgment calls stay with people: a disputed price, a vendor you have not used before, an unusually large payment, a change to a vendor’s bank details. Treat those as mandatory human checkpoints. Tellency is built around intelligent agents that automate workflows while approvals remain governed by role-based rules, which fits this division of labor.

Step 5: Build approvals that match your risk

Approval is where most invoices wait, so it deserves a design, not a default.

  • Route by amount and category. Routine low-value invoices that match their PO can need one approver. Capital items and new vendors need two.
  • Name a backup for every approver. Delegation prevents invoices from stalling during vacations.
  • Set reminders and escalation. If an invoice sits for a set number of days, it moves up automatically.
  • Keep the trail. Every approval should record who, when and under which rule. It makes audits and vendor disputes quick to resolve.

Role-based access and approval processes are central to how Tellency works: every action is tied to a role and a business rule, so approvers see what they need to decide and nothing else.

Step 6: Schedule payments for cash flow, not convenience

Paying every invoice the moment it is approved is easy, and it is usually the wrong choice. Schedule by the vendor’s terms and your cash position.

  • Pay on the due date, not early, unless the vendor offers a discount worth taking.
  • Compare any early-payment discount to the cost of the cash. A discount that is worth more than your borrowing cost deserves a standing rule.
  • Group payments into regular runs, such as weekly, so you review cash once and pay once.

With AP and the general ledger on the same platform, you see committed payables next to your bank position when you plan a payment run, instead of exporting two reports and merging them.

Step 7: Reconcile and close the loop

After payment, confirm that the bank agrees with your records and that each invoice is closed. Match payments to bank statement lines, and compare vendor statements with your AP balance from time to time to catch missing credits or unrecorded invoices. Accurate coding at the ledger is what makes month-end reporting reliable.

Tellency’s financial management module covers accounting and bank reconciliation, so the payment you release in AP appears in the same system you reconcile against.

A worked example: a small distributor

Take a regional distributor with eight staff that buys from 40 suppliers. Before streamlining, invoices arrive by email, the owner approves them from a phone, and the bookkeeper matches them against a spreadsheet of POs. A typical invoice takes several touches and sits for days.

After redesigning the process, the same distributor:

  1. issues every purchase above a set amount as a PO from the system,
  2. has the warehouse receive against the PO line the day goods arrive,
  3. lets invoices matching within tolerance flow straight to a single approver,
  4. sends mismatches to a queue with the reason attached,
  5. pays in one weekly run timed to terms.

The bookkeeper’s job changes from keying and chasing to resolving exceptions. The owner approves a short list instead of an inbox. The distributor’s own figures will differ, but the pattern holds: fewer touches, no re-keying and a payment date chosen on purpose.

For a sector-specific view of the same idea, see how AP automation works for import-export traders.

Where accounts receivable fits

Accounts receivable (AR) is the mirror image: the money customers owe you. The two are different workflows with different goals, but they share data and they share the cash position, so it makes sense to streamline them together.

The usual AR improvements are:

  • Generate and send invoices automatically from the sales order or shipment, instead of rebuilding them by hand.
  • Offer several ways to pay and put a payment link on each invoice.
  • Automate reminders before and after the due date.
  • Match incoming payments to open invoices automatically.

What makes AR run smoothly is the same thing that makes AP run smoothly: one set of customer, item and ledger data. When a quotation becomes an order, then a delivery, then an invoice, nobody retypes it. Tellency’s sales and CRM and finance modules share data with inventory, so the invoice reflects what actually shipped. Together, AP and AR give you a reliable view of cash coming in and going out.

What to look for in software that streamlines AP

If you are choosing a system, judge it on how well it connects, not on a feature checklist alone.

What to look for Why it matters
POs, receiving and invoices in one system Enables three-way matching without exports or re-keying
Role-based access and approvals Enforces separation of duties and your own approval rules
Exception handling Lets staff work only on invoices that need attention
Link to inventory and the ledger Keeps stock, payables and reporting consistent
Audit trail Makes audits and vendor disputes quick to resolve
Realistic implementation time Gets the benefit sooner and limits disruption

The last row is practical. A system that takes a year to set up delays the savings by a year. Tellency’s implementation takes about eight weeks.

How Tellency fits

Tellency is an AI-native ERP and CRM platform that puts finance, sales, inventory, manufacturing, HR and reporting in a single system, with intelligent agents handling workflows and role-based approvals governing every action. For payables, that means the purchase order, the stock receipt, the invoice and the ledger entry sit on the same data, which is what removes the manual re-entry that slows AP down.

Pricing starts from $79 per month per seat, and implementation is available as a service. It supports cloud and self-hosted deployment, and it serves retail, manufacturing, wholesale, professional services and distribution businesses.

Tellency

If you want to see how your own PO-to-payment process would run on one platform, start on the Tellency platform page.

Common mistakes to avoid

  • Automating a broken process. Fix the policy, thresholds and approval routes first, then build them into the system.
  • Skipping the receipt. A two-way match misses short shipments and duplicate deliveries.
  • Setting tolerances too loose. Small allowances multiply across hundreds of invoices.
  • Letting one person do everything. Keep buying, receiving and paying with different people or roles.
  • Changing vendor bank details by email. Verify any change by calling a known contact before paying. This is a common fraud route.
  • Measuring nothing. Track the time from invoice receipt to payment, the share of invoices that match first time and the number of open POs. These show whether the changes are working.

FAQ

Can AI process accounts payable?

Yes, for the repetitive parts. AI can read invoices, suggest coding, match them to POs and receipts, and flag likely duplicates. People should still decide disputed amounts, new vendors, unusual payments and any change to vendor bank details.

What is the difference between accounts payable and accounts receivable?

Accounts payable is what you owe suppliers. Accounts receivable is what customers owe you. Supplier invoices go to AP, and the invoices you send to customers belong to AR. Both draw on the same ledger and cash position.

What is three-way matching?

It is the check that the purchase order, the receiving record and the vendor invoice agree on quantity and price before payment. It catches overbilling, short deliveries and duplicate invoices. Set a tolerance for small differences and send larger ones to review.

How long does it take to set up an integrated AP system?

It depends on how many modules and users you need. Tellency’s implementation takes about eight weeks, and the first step is writing down your purchasing and approval rules so they can be built into the system.

Sources

Written with BabyLoveGrowth technology